Sharp 488nm GH04850B2G 55mW Laser Diode

Description

Sharp 488nm GH04850B2G 55mW Laser Diode
This is a 5.6mm Diode
Datasheet
Diodes are current hungry and as they heat up their internal resistance is  lowered causing them to want to draw more current requiring constant current regulator instead of just voltage regulation. Don’t attempt to connect the diode directly to a fixed voltage source like a battery or wall adapter. A laser driver is needed to power this diode reliably. If you run off a alternative power source like a bench power supply you are accepting the risk of doing so and if not familiar with how to reduce the risk by following a specific sequence of connecting and disconnecting from the supply immediate damage can result. Non Laser driver power sources even if a current regulate source like DC-DC converters or LED driver are a very common cause of very short life or immediate damage being harsh on the diode on every power cycle due to the extremely sensitive nature of laser diodes. If you want I do have an option fo the diode in a copper module with a laser driver installed where a very common cause of very short life or immediate damage being harsh on the diode on every power cycle due to the extremely sensitive nature of laser diodes. If you want I do have an option for the diode in a copper module with a laser driver installed
12 Random samples tested from this batch range from 486nm to 492nnm.
Wavelength Test
Diode #1 486.8nm at 55 mA
Diode #2 487.4nm at 70 mA
Diode #3 487.2nm at 55 mA
Diode #4 488.3nm at 130 mA
Diode #5 490.3nm at 120 mA
Diode #6 491.8nm at 100 mA
Diode #7 490.7nm at 80 mA
Diode #8 487.6nm at 110 mA
Diode #9 486.9nm at 100 mA
Diode #10 490.0nm at 95 mA
Diode #11 490.2nm at 100 mA
Diode #12 490.8nm at 130 mA
Power test with G-2 Glass lens
*Disclaimer*
All laser diodes/modules offered are components for integration into a wide range of end products. They require fundamental understanding laser safety, electronic characteristics of laser diodes which are current source, specialized current source circuitry required to properly power them and provide functionality required by the end product, optics for collimation, optics used for beam shaping/combining/filtering, and proper thermal management of waste heat generated. Failure to properly incorporate these items into your end product can cause a dangerous situation resulting in bodily harm to yourself or others.
No end product
specific
bundle listings or as often referred to as “Kits” are offered and no commissioned building or repair of any completed end products are offered. Please do not ask.
By purchasing diodes/modules here you are agreeing to the following.
– You are over 18 years of age .
– You understand that laser components that are mentioned above are dangerous when not properly assembled into a finished product.
– You will use these as components and properly incorporate them into a finished product.
– You will use these diodes/modules in a safe and responsible manner and for a legal purpose.
– You are legally responsible for the use of these components, improper use of these components or their end products.
– You are legally responsible for any injury to anybody resulting from the use of or assembly of these components or their finished products.
– You Accept these diodes/modules as a COMPONENT for integration in a system of YOUR OWN design and will be legally responsible from any and all LIABILITIES These Diodes and Modules are sold solely as a component for incorporation into the customer’s end products. Therefore, this diode/module is exempt from compliance with the appropriate requirements of FDA 21CFR, section 1040.10 and 1040.11 for complete products.